Bin with fork-lift frame (Hot water treatment)
product descriptionMachine suited to treat product in boxes (several dimensions) with hot water.
Capacity and dimensions:
• The capacity depends on the amount boxes that need to be treated at the same time.
• Available for every capacity and different dimensions of boxes.
• The boxes must be picked up with the lift frame and placed in the machine using a forklift.
• The pump will circulate the liquid, hot water is injected on the top of the boxes.
• A pump in combination with a heather and digital thermostat, provide a constant temperature.
• The pump sucks in the front bottom of the machine, the hot water is forced from top to bottom.
• This results in an even and fast distribution of temperature throughout the entire box.
• After the treatment time, the frame with box must be lifted with the forklift.
• The box is placed on the 'cross', you take the frame out of the box and it's available for the next box.
• The 'cross' will by transported by hand to the side to leak, any leakage will flow back in the bin.
• After the box is leaked, it can be taken of the 'cross' with forklift.
• All steel parts are shot blasted, galvanized and sprayed with two component paint, which will give a high protection against water and disinfection liquids.
- International delivery
- Over 100 years experience
- Wide expertise