Machine developed to disinfect product with a shower
  (in plastic or wooden boxes)

  Advantage:
  • Possibility to make the machine fully automatic, what will give labour-
    saving.
  • The used disinfection liquid is limited to the minimum.
  • Used for disinfection of product but also empty boxes.
  • For several boxes used as: plastic 60/40cm boxes; plastic 75/50cm
    boxes and cubic boxes with or without product and several different
    dimensions.
  • Almost the same as the sink principle. 
  • Long leaking time after showering.

  Capacity and dimensions:
  • The capacity is dependable of the length of the machine and the shower
    time.
  • The shower can be delivered for several boxes on pallets or cubic
    boxes, with several dimensions (also to cubic boxes onto each other)

  Way of working:
  • The cubic boxes or pallets with boxes, will be placed the a fork lifter
    on the chain.
  • The boxes or pallet will be transported by the chain to the shower
     place. 
  • The shower system consist of a water dividing star, witch divides the
     liquid on a perforated plate.
  • With a big pump capacity of 110 m3/ hour, the liquid is showered over
    the product what will give a complete and good disinfection to the
    product.
  •  After the shower place, the chain will transport the product to leak-out
    before they are
    taken of the machine.
  • On the last leak-out place, the product can be taken of the machine
    with a fork lifter.

  Optional:
  • An electrical moving hood around the shower plate, so the liquid leaking
    on the outside of the cubic box to avoid leaking liquid on the outside
    of the box.
  • A timer to switch the shower time on and of.
  • Fully atomised system, to get a constant working cycle.
  • In height changeable shower plate, for several cubic box heights.
  • Possibility to close the shower place with electrical working curtains.
  • Electrical working ventilator in a hood, onto a leak out place to blow
    most of the liquid of the product.
  • It is possible to deliver the machine with a special formed collect tank,
    to minimise the remain liquid.
  • A heating unit to warm up the disinfection liquid.
  • Disinfection liquid buffer tank, in witch the liquid can be mixed in
     advance and can be saved before using it.
  • Disinfection or anti foam dosing pump, witch will give a adjusted
     volume every time the pump will start.
  • A remote control to start and stop the machine from the fork lifter.

  General:
  • All steel parts are shot blasted, galvanized and sprayed with two 
     component paint, with will give a high protection against water
     disinfection liquid and other filthiness.